Автомобильные Форумы POKATILI.RU

* Do you sell the light version on ebay?
It will be much easier to buy...

eecfo
I can't. Paypal refuses to transfer funds to Russia. So I sell only on the ex-USSR territory.

There're other people in Britain, Czech Republic and Argentina. We did some protocol investigations together and make a kind of an agreement about our sales. We've divided the worldwide market in some way

Where are you from? What Ford are you driving?

_________________
Ford Fiesta Mk1 '83 - на всех дорогах страны
Ford Escort Turnier '97 CLX 1.8, был когда-то...
Renault Duster '12 2.0 4WD Privilege - больше скорость, меньше ям
http://creator.bcsoft.org/eeciv/ диагностика EEC-IV

* I am in Bulgaria.

Does your version work with the prog ForDiag 1.20 ?
It seems to have all the gauges, adaptation tables etc or you have own version which works with the little board ?

Old Zetec 94 gasoline EEC IV (has the 2 pin serial bus plug, 18, 19).

eecfo
Tomas developed his own adapter board and software called ForDiag. So as I did. My board works only with my software called AlphaReader.

Why don't you want to buy the Tom's board? Czech Rep. and its post office is much closer to Bulgaria than Russia. Also his board still has more features than mine (but I'm chasing him more or less ).

_________________
Ford Fiesta Mk1 '83 - на всех дорогах страны
Ford Escort Turnier '97 CLX 1.8, был когда-то...
Renault Duster '12 2.0 4WD Privilege - больше скорость, меньше ям
http://creator.bcsoft.org/eeciv/ диагностика EEC-IV

* I will contact him ok.

Do you know or have actually somewhere the docs which describe the original Ford protocol DCL ? etc pdf or other?

* I have some serial<->rs485 adapter, I was thinking could a connection be established without a micro-controller in the middle but directly PC to Ford.

If there was the protocol description somewhere I may attempt to establish
and read some stats to see if this would work.

* Or do the same thing with a smaller PIC controller.

eecfo
google for "LHBH0 strategy guide". Chapter 13. That will be a kind of protocol description.

You can use simple RS485 adapter to switch EEC to CART mode and get a continuous flow of empty frames. But you need a microcontroller to match the perfect timing required to transmit data to EEC between frames.

_________________
Ford Fiesta Mk1 '83 - на всех дорогах страны
Ford Escort Turnier '97 CLX 1.8, был когда-то...
Renault Duster '12 2.0 4WD Privilege - больше скорость, меньше ям
http://creator.bcsoft.org/eeciv/ диагностика EEC-IV

* Actually bought the Tom's adapter to save time.
It would be great if russian version of paypal appears, or similar service (may be russian made) is established, and it would make trade of such items much quicker and easier for all sides.

Помогите пожалуйста. Незнаю где спросить, который OBD стоит на Мондео И в 1993 году.
OBD I или OBD II. Буду очень благодарен.

На этих мондюках не было никакого OBD. Читай ветку сначала.

_________________
Escort [MkVII] '97 - 3 двери, PTE (CVH) 1.4i, ABS, ГУР - живчик. Нашел нового хозяина. Больше не требует внимания к своему ЛКП.

Creator Я тоже хочу поставить диагностику, куда мне ее подключить.

А зачем она тебе нужна?

remont1977 как для чего, чтобы не лазить все время под капот и не диагностировать по светодиоду

peleh_sm
на самом деле "OBD" там есть.
Но это OBD I, и он довольно мало требований предъявлял к диагностике. Грубо говоря, "диагностика должна быть" и остальное на откуп производителя

_________________
Ford Fiesta Mk1 '83 - на всех дорогах страны
Ford Escort Turnier '97 CLX 1.8, был когда-то...
Renault Duster '12 2.0 4WD Privilege - больше скорость, меньше ям
http://creator.bcsoft.org/eeciv/ диагностика EEC-IV